Education and Training in Pharma
FMEA Training Course
Diagram of Failure Mode Effect Analysis

FMEA Training Course

Learn how to apply failure mode effect analysis (FMEA) in the FDA environment.

FMEA Training Course

Learn how to apply failure mode effect analysis (FMEA) in the FDA environment.
FMEA Training Course GetReskilled


Join 337 Learners

Online Course

4 Hours

Contact Our Team

Learn How to Apply Failure Mode Effect Analysis (FMEA)

This short FMEA training course will show how to apply this risk management technique in an FDA environment.
The use of Risk Management Tools is an essential element of any programme to drive down manufacturing costs and reduce waste.

Understand the fundamentals of how to apply risk management to the manufacture of safe medicines and medical devices.
Be able to apply Fault Tree Analysis (FTA) to identify the potential faults in a manufacturing system.
Be able to apply FMEA (Failure Modes Effects Analysis) to identify the modes of failure, the factors causing them and the likely effects from them.
Understand how to document the risk management process for future audits by the FDA.

What Does the Online Classroom Look Like?


We use one centralized platform where you can log into your classroom. There you can get assignments, interact with faculty and peers, reply to message boards, and more.

Each week, you’ll complete a series of videos, quizzes, interactive activities and projects through our online platform, available to access 24/7.
Online courses can start off great, but staying motivated can be a challenge. So, you’ll get regular feedback reports (and emails or phone calls if you fall behind!) to keep you on track.
Because it’s online, there are no long commutes, traffic jams or crowded trains to deal with on the way to class. Study at home after the kids have gone to bed.
Your working schedules are unpredictable so we offer flexible delivery. Slow down, speed up or pause the delivery of the course.
Hear From Our Past Students

Andy Wnuk, MSc (Eng) MIEI

“Along with the technical training in I would rate the course 10 out 10 and would highly recommend to others, very interesting, informative and very well presented. Relevant totally to my needs and expectations.”

David O’Shea, March 2012

“I found this course very beneficial and I am delighted that, even at early stages in the course, it has already provided me with the opportunity to secure a position within the pharmaceutical industry.”

Denis Hegarty, May 2012

“I found the course was run very professionally, The course notes and videos supplied were excellent, the notes tied in very efficiently and accurately with the videos. Dr Joe Brady’s presentation on the videos and his expertise and help at the webinars was outstanding. I found it very easy to continue studying even though I found employment two months into the course. I would highly recommend this course to anyone hoping to further their education in this field.”

Tan Sear Enyu, Venture Corporation Limited, SA

“The lecturers have vast knowledge to share and are technical specialists within the Life Sciences Industry…there was a lot of encouragement and team exchange of experience to bring in for class work and assignment participation.”


Joe Brady
Joe Brady

Lecturer, Dublin Institute of Technology

Dr. Joe Brady is an assistant lecturer with the Dublin Institute of Technology (DIT), in the School of Chemical and Pharmaceutical Sciences. Joe is a certified trainer, and highly experienced in competency based training. He designs and prepares educational modules and full academic courses ranging from MSc, MEngSc. BSc, to Certificate level, for a range of academic institution.

He is also a supervisor for MSc/MEngSc and PhD theses. Joe has over seventeen years project experience in the pharmaceutical, biopharmaceutical and medical device industries in Ireland, Singapore, China, The Netherlands, France and the USA.

Join our Alumni who are working for:

pfizer company logo
abboutt company logo
novartis company logo
lilly company logo
roche company logo
amgen company logo
sanofi aventis company logo
gsk company logo


One Person

Price For one person


We’ll contact you in one working day with orientation & sign-in details upon purchase.

Try Us Risk FREE for 7 Days 100% Money Back Guarantee.

Got a Question?

Contact Our Team

Contact Us

Call Geraldine: +1 (617) 901 9268

Call Niki: +353 (0)21 2409013

Course Content

Introduction to Risk Management

In this sequence you will develop an understanding of the history and crucial importance of risk management as well as the basic steps involved in its application.

Application of Fault Tree Analysis (FTA) for identifying risks

In this presentation we will learn about the risk management tool ‘Fault Tree Analysis’ and see an example of where and how we can use it.

Implementation of Failure Modes Effects Analysis (FMEA)
 to develop solutions

This presentation shows an example of the main steps in performing a Failure Mode Effects Analysis (FMEA) and describes how this risk management technique summarizes the important modes of (a) failure, (b) factors causing these failures, and (c) the likely effects of these failures.

Documentation of Risk Management practices

In this sequence, we take a practical look at managing a complete risk management process in terms of identify risk, analyzing risk, evaluating risk and controlling risk.

Start Your Application

Contact Our Team

Contact Us

Call Geraldine: +1 (617) 901 9268

Call Niki: +353 (0)21 2409013

Got More Questions?

My Name*

My Email*

My Message*